top of page
ABRC Logo-2.png
ABRC Logo-2.png

NOT SURE WHAT YOUR HOME ACTUALLY NEEDS?

You don't have to figure it out on your own.

​

ABRC offers free inspections for roofing, siding, gutters, and exterior projects throughout the Tucson area. We'll take a close look at the condition of your home, explain what we find, and help you understand whether repair, restoration, or replacement makes the most sense.

​

No pressure. No scare tactics. Just clear information and practical options.

sergio_2_edited.jpg
I need help with...
b25009_cc6670d84a934a5298f44f8674f41e89~mv2.png.avif

LOW-INTEREST FINANCING AVAILABLE

ABRC offers access to EarthWise low-interest home improvement loans through Groundswell Capital, giving qualified homeowners another way to make their roofing or siding projects more managable.

​

Ask us about available financing options and how they may fit your project and budget.

Best Roofing Materials for High Wind Areas

Oct 12
15 min read

A roof in a windy area fails for a few common reasons: the edge lifts, fasteners pull loose, shingles tear, tiles shift, or water gets driven under the roofing after the outer layer is damaged. The roofing material matters, but the installation often matters just as much.


For homeowners in places with thunderstorms, coastal storms, open desert winds, or monsoon weather, the best roof is not just the one that looks good on day one. It needs to resist uplift, stay attached at the edges, shed wind-driven rain, and help manage heat. That last point matters in hot regions like Tucson, Marana, and Vail, where a roof can take a beating from both wind and sun.


Metal, asphalt shingles, and tile can all work in high-wind areas when properly specified and installed. They differ in cost, appearance, weight, repair needs, noise, energy performance, and long-term durability. This guide compares each option in practical terms so the choice is easier to make.


Wide-angle view of a desert home with a wind-resistant roof under a bright sky
High winds and harsh sun both influence the right roofing choice.

What makes a roof good for high wind areas


Wind does not just push against a roof. It creates pressure changes around the home. As wind moves over the roof surface, it can create uplift, especially near corners, edges, ridges, eaves, and overhangs. Those areas often fail first.


A good high-wind roof needs several things to work together:


  • A material with strong wind resistance

  • Secure fastening that matches the manufacturer’s requirements

  • Proper edge metal and flashing

  • A solid roof deck

  • A water barrier under the finished roofing

  • Good ventilation and heat control

  • Maintenance that keeps small issues from becoming major failures


Many roofing products advertise a wind rating, but that rating usually depends on exact installation steps. For example, an asphalt shingle may require a specific number of nails in a specific location. A metal roof may need approved clips, screws, and panel spacing. Tile may need foam, screws, clips, or other fastening methods based on local code and roof design.


That means the question is not only “What is the strongest material?” It is also “Which system can be installed correctly on this home, in this climate, and within this budget?”


When comparing options, look at three categories.


Durability


Durability includes impact resistance, resistance to cracking or bending, protection against UV exposure, and how the roof ages after years of heat, rain, and wind.


Metal is often strong over the long term. Tile can last a long time but can crack under impact or foot traffic. Asphalt shingles are easier to repair, but they usually have a shorter service life than premium metal or tile.


Wind damage resistance


Wind damage resistance comes from the material, the fastening pattern, the roof shape, and the details at the edges. Hip roofs generally perform better than gable roofs in wind because they have fewer large vertical wall ends catching wind. Low-slope areas, roof penetrations, and poorly secured eaves can create weak spots.


A roof with an excellent material but weak edge details can still fail.


Energy efficiency


Energy efficiency depends on color, reflectivity, ventilation, insulation, and the roof assembly. Light-colored and reflective roofing can reduce heat absorption. Some roofing systems also create an air space that helps reduce heat transfer into the attic.


In hot, sunny climates, energy performance is not a luxury feature. It can affect indoor comfort, air conditioning load, and attic temperature.


Quick comparison of metal, asphalt shingles, and tile


The best material roofing choice depends on the home, the exposure, and the budget. The table below gives a broad comparison.


Roofing material

Wind resistance

Durability

Energy efficiency

Best fit

Metal roofing

Excellent when engineered and fastened correctly

Long-lasting and resistant to many forms of weather damage

Strong, especially with reflective coatings or lighter colors

Homes needing high wind resistance, long life, and good heat performance

Asphalt shingles

Good when high-wind-rated shingles are installed correctly

Moderate, with easier repairs but shorter life than many premium systems

Fair to good, depending on color, attic ventilation, and shingle type

Budget-conscious projects or homes needing simpler repairs

Tile roofing

Good to excellent when installed with proper fastening

Very long-lasting material, though individual tiles can break

Strong in hot climates, especially with natural thermal mass and air space

Southwestern, Mediterranean, and desert-style homes with strong roof framing


No material wins every category for every home. Metal often leads for wind resistance and weight. Asphalt shingles often lead on upfront cost and repair simplicity. Tile often leads on appearance, longevity, and heat performance in the right setting.


Metal roofing performs well when wind resistance is the priority


Metal roofing is one of the strongest choices for high-wind regions. It comes in several forms, including standing seam panels, exposed-fastener panels, metal shingles, and stone-coated steel. For residential high-wind performance, standing seam and properly engineered metal systems are common choices.


A standing seam metal roof has raised seams that connect panels together. Many systems use concealed fasteners, which protects attachment points from direct weather exposure. Exposed-fastener systems can also perform well, but the screws and washers need more attention over time because they remain exposed to sun and rain.


Metal roofing is often a good match for high wind areas roofing projects because it combines strength, low weight, and strong shedding of rain.


Metal roof pros


Strong wind performance

Properly installed metal panels can resist uplift well, especially when the system is engineered for the home and local wind conditions.

Good energy performance

Light colors and reflective finishes can reduce heat gain. Some assemblies also allow airflow beneath the panels.

Fire resistance

Metal is noncombustible, which can be valuable in dry regions.

Lightweight structure

Metal usually weighs far less than tile, so it can be easier on the roof framing.

Long service life

Quality metal roofing can last a long time with basic maintenance.

Low water absorption

Metal does not absorb water, and it sheds rain quickly when the roof slope is appropriate.


Metal roof cons


Metal roofing has a higher upfront cost than standard asphalt shingles in many markets. It also requires skilled installation. Poor panel alignment, wrong fasteners, bad flashing, or weak edge details can reduce performance.


Other drawbacks include:


  • Possible oil canning, which is visible waviness in flat metal panels

  • More noticeable sound during heavy rain if the roof assembly lacks insulation or sheathing

  • Potential denting from large hail or falling branches, depending on metal type and thickness

  • Color fading over time with some finishes

  • Expansion and contraction that must be allowed for during installation


Metal is also not one single product. A heavy-gauge standing seam roof with concealed clips is different from a thin exposed-fastener panel. The details matter.


When metal makes the most sense


Metal is a strong choice when the home needs maximum wind resistance without adding much weight. It also works well for homeowners who plan to stay in the home for many years and want a roof with lower long-term maintenance.


In hot climates, a light-colored metal roof with a reflective coating can be a practical energy feature. In desert areas, metal can handle sun exposure well when the finish is suited to the climate.


Metal may be especially worth considering if:


  • The home is exposed to open winds with little tree or building protection

  • The roof has simpler planes that suit metal panels

  • Long-term value matters more than the lowest upfront cost

  • The roof structure cannot support heavy tile

  • Energy efficiency is a major goal


Close-up view of standing seam metal roof panels secured on a residential roof
Standing seam metal roofs can offer strong wind resistance when installed correctly.

Asphalt shingles are affordable and familiar, but quality varies


Asphalt shingles are the most common roofing material on many U.S. homes. They are widely available, relatively affordable, and easy for many roofers to repair. For high-wind areas, the key is choosing shingles rated for higher wind speeds and installing them exactly as the manufacturer requires.


Architectural shingles usually perform better than basic three-tab shingles. They are thicker, heavier, and often have better seal strips. Many high-wind shingle systems require extra nails, correct nail placement, starter strips, and proper sealing at the edges.


The adhesive strip on shingles matters. Heat helps activate the seal, but dust, cold weather, poor installation, or age can reduce the bond. Once shingles start lifting, wind can get underneath and peel them back.


Asphalt shingle pros


Asphalt shingles remain popular for good reasons.


  • Lower upfront cost

    Asphalt shingles usually cost less to install than metal or tile.


  • Simple repairs

    Damaged shingles can often be replaced without disturbing large sections of the roof.


  • Many style options

    Architectural shingles come in many colors and profiles.


  • Broad contractor familiarity

    Most roofing contractors have experience with asphalt shingles.


  • Good performance when upgraded

    High-wind-rated architectural shingles can perform well when the roof deck, underlayment, and edge details are done right.


Asphalt shingle cons


Asphalt shingles are more vulnerable to tearing, curling, granule loss, and adhesive failure than many premium roofing systems. Heat can speed up aging, especially on poorly ventilated attics or dark-colored roofs.


Common downsides include:


  • Shorter expected lifespan compared with quality metal or tile

  • More frequent replacement over the life of the home

  • Wind damage risk if shingles are poorly nailed or not sealed

  • Heat absorption, especially with dark colors

  • Granule loss from age, hail, or foot traffic


Shingles can also be less forgiving of installation mistakes. Nails driven too high, too low, too deep, or at an angle can reduce wind resistance. Missing starter strips and weak edge metal can also create failure points.


When asphalt shingles make the most sense


Asphalt shingles are a practical choice when budget matters and when the home’s wind exposure is moderate. They can also make sense if the homeowner wants a familiar roof type that is easy to inspect and repair.


Choose asphalt shingles more carefully in windy areas. Look for architectural or premium shingles with a wind rating that meets or exceeds local code requirements. Ask the contractor how many nails will be used per shingle and whether the installation includes upgraded starter strips, drip edge, and underlayment.


Asphalt shingles may be the right fit if:


  • The budget is limited

  • The roof has many complex sections where metal or tile would cost more

  • Repairs need to be simple and affordable

  • The home is not in the most exposed wind location

  • A shorter replacement cycle is acceptable


For energy efficiency, lighter colors can help reduce heat absorption. Good attic ventilation is also critical. Even a better shingle can age faster if heat builds up under the roof deck.


Tile roofing is durable and efficient, but it needs the right structure


Tile roofs are common in the Southwest and other warm regions because they look natural on stucco, Spanish, Mediterranean, and desert-style homes. Clay and concrete tile can last a long time, and tile performs well in heat. The material itself does not decay like organic materials, and the curved profile can create airflow beneath the tiles.


In areas like Tucson, Marana, and Vail, tile also fits the local architecture. It handles sun exposure well and can support energy efficiency by adding thermal mass and ventilation space above the roof deck.


Wind performance depends heavily on fastening. Loose-laid or poorly secured tiles can become a hazard in strong winds. Properly installed tiles use mechanical fasteners, foam adhesive, clips, battens, or other approved methods based on the tile type, roof slope, wind exposure, and local code.


Tile roof pros


Tile has several strengths for windy and hot regions.


  • Long-lasting material

    Clay and concrete tiles can remain serviceable for many years when maintained.


  • Strong heat performance

    Tile can help reduce heat transfer, especially when installed with an air space below the tiles.


  • High curb appeal

    Tile has a distinct look that works well with many Southwestern and Mediterranean-style homes.


  • Resistance to sun damage

    Tile handles UV exposure well compared with many materials.


  • Fire resistance

    Clay and concrete tile are noncombustible materials.


Tile roof cons


Tile is heavy. Not every roof structure can support it without evaluation. Concrete tile is often heavier than metal and asphalt shingles, and clay tile can also add significant load. Before switching to tile, the roof framing should be checked.


Tile can also break. Foot traffic, falling branches, hail, or careless repairs can crack individual pieces. Cracked tiles may allow water to reach the underlayment, and the underlayment is a key part of the system. In many tile roofs, the tile sheds most water, but the underlayment provides the main backup protection.


Other drawbacks include:


  • Higher installation cost than asphalt shingles

  • More specialized repair needs

  • Breakage during maintenance if walked on incorrectly

  • More complex fastening requirements in windy zones

  • Underlayment replacement may be needed even when tiles remain usable


When tile makes the most sense


Tile is a strong choice when appearance, heat performance, and long service life are top priorities. It fits especially well in hot, dry climates and homes designed to carry the weight.


Tile may be a smart option if:


  • The home already has tile and the structure supports it

  • The style of the home calls for tile

  • Heat control matters

  • The homeowner values long-term material life

  • Local roofers have strong tile experience


Tile is less ideal if the roof framing is not designed for the load, if the home has many fragile roof details, or if frequent rooftop access is expected.


Eye-level view of clay tile roofing on a Southwestern home in bright sunlight
Tile roofing suits many hot climates, but fastening and underlayment are critical.

Wind resistance depends on the whole roof system


Choosing the right material is only part of the job. A roof that survives high wind works as a system. The roof deck, underlayment, flashings, edges, vents, and fasteners all play a role.


Roof deck condition matters


The roofing material fastens into the roof deck or framing. If the decking is weak, rotted, delaminated, or poorly attached, even a high-quality roof covering can fail.


Before installing a new roof, the contractor should inspect the deck. Soft spots, old water damage, and loose sheathing need attention. In some cases, the deck may need renailing or replacement in damaged areas.


Edges and corners need extra care


Wind pressure is often strongest at roof corners and edges. That is why drip edge, fascia condition, starter courses, hip and ridge caps, and perimeter fastening matter so much.


For asphalt shingles, the starter strip helps seal the first row. For metal, edge trim and panel clips must be secure. For tile, perimeter fastening must match the local wind requirements.


A roof often starts failing at the edge. Once the edge lifts, wind can work its way underneath.


Underlayment helps when wind drives rain


Even the best roof covering can allow some wind-driven rain under certain conditions. Underlayment adds a second layer of defense.


Synthetic underlayments, peel-and-stick membranes, and self-adhering products can improve water protection in vulnerable areas. The right choice depends on roof type, slope, climate, and code.


In hot climates, underlayment must also tolerate high attic and roof temperatures. Not all products perform the same under intense heat.


Flashing and penetrations are common weak spots


Plumbing vents, chimneys, skylights, wall intersections, and HVAC curbs interrupt the roof surface. Wind-driven rain often finds these areas.


Good flashing should direct water out and over the roofing, not trap it. Sealant alone is not a long-term flashing plan. It can dry, crack, or separate over time.


Installation quality affects warranty coverage


Many roofing warranties depend on proper installation. If nails, screws, clips, underlayment, or ventilation do not meet the manufacturer’s requirements, warranty coverage may be limited.


Keep records of the materials installed, the product names, the warranty documents, and photos of the completed work. That information can help later if repairs or claims are needed.


Energy efficiency should be part of the roofing decision


A high-wind roof should also help manage indoor comfort. Wind resistance protects the home during storms. Energy efficiency helps every hot afternoon.


Roofing affects heat in several ways.


Color changes heat absorption


Darker roofs absorb more heat. Lighter roofs reflect more sunlight. This matters in sunny regions, especially where air conditioning runs for much of the year.


A light gray metal roof, a reflective shingle, or a lighter tile can reduce heat gain compared with a very dark roof. The exact effect depends on insulation, attic ventilation, roof slope, sun exposure, and home design.


Reflective surfaces can reduce roof temperature


Some metal roofs and asphalt shingles are made with reflective pigments. These products can help reflect more solar energy than standard dark materials. Tile can also perform well, especially in lighter colors and profiles that allow airflow.


Look for roofing products designed for cool roof performance if heat control is a priority. Product labels and manufacturer data can help compare options.


Ventilation protects roof performance


Attic ventilation helps remove hot air and moisture. Poor ventilation can make the attic hotter, increase cooling strain, and shorten the life of some roofing materials.


Good ventilation usually includes both intake and exhaust. Intake often comes from soffit vents. Exhaust may come from ridge vents, off-ridge vents, or other roof vents. The system should be balanced so air can move properly.


Insulation still matters


Roofing helps, but insulation does much of the work inside the home. A reflective roof over a poorly insulated attic will not perform as well as a complete system with proper insulation, air sealing, and ventilation.


For many homes, the best comfort improvements come from combining roofing choices with attic upgrades.


How to choose the right roofing material for your home


The right choice comes from matching the roofing system to the home’s risks, structure, climate, and budget. Use the steps below before deciding.


Start with local wind exposure


A home on an open lot, hill, ridge, desert edge, or coastal area may face stronger wind than a home protected by neighboring buildings and trees. Local storm patterns matter too. In southern Arizona, monsoon storms can bring sudden gusts and wind-driven rain. In coastal states, tropical systems and hurricanes can set stricter requirements.


Ask what wind design requirements apply to the property. Local building departments and licensed roofing contractors can help identify the relevant code standards.


Check the roof shape and slope


Simple roof shapes are easier to protect from wind. Complex roofs with many valleys, dormers, walls, and penetrations need extra detailing.


Roof slope also affects material choice. Some materials need a minimum slope. Low-slope areas may require special underlayment or a different roofing system.


Confirm the structure can support the material


This is especially important for tile. If the home currently has asphalt shingles, switching to tile may require a structural review. Metal is much lighter and can often be easier to add without major framing concerns, though every home should still be evaluated.


Compare upfront cost with long-term cost


The cheapest roof on installation day is not always the least expensive roof over time. A lower-cost asphalt roof may need replacement sooner than metal or tile. A premium metal roof may cost more upfront but require fewer replacements.


Think about:


  • How long the home will be owned

  • Expected repair needs

  • Insurance requirements

  • Energy savings potential

  • Maintenance demands

  • Local labor availability


Match the material to maintenance habits


Some homeowners are comfortable scheduling regular inspections and small repairs. Others want the lowest maintenance possible.


Asphalt shingles may need more frequent attention as they age. Tile needs careful inspection for cracked pieces and underlayment condition. Metal needs checks at fasteners, flashings, sealants, and coatings.


No roof is maintenance-free.


Ask better questions before signing a contract


A roofing bid should describe more than the finished material. Ask questions that reveal the quality of the system.


Good questions include:


  • What wind rating does this product carry when installed as proposed?

  • How many fasteners will be used, and where will they be placed?

  • What underlayment will be installed?

  • How will roof edges, ridges, valleys, and penetrations be secured?

  • Does the roof need improved ventilation?

  • Are there special requirements for warranty coverage?

  • Will damaged decking be replaced before the new roof goes on?

  • Is the contractor experienced with this material in local wind conditions?


If a bid is much lower than the others, compare the details. It may leave out upgraded underlayment, edge metal, ventilation, disposal, deck repair, or warranty requirements.


Overhead view of roofing materials displayed beside a residential roof deck
Comparing materials side by side helps clarify weight, texture, and installation needs.

Which roofing material is best for high wind areas


There is no single winner for every home, but there are clear patterns.


Metal roofing is often the strongest overall choice when wind resistance, long life, low weight, and energy efficiency all matter. It performs especially well when installed as a complete engineered system with strong edge detailing.


Asphalt shingles are the practical budget choice when using high-wind-rated architectural shingles and careful installation. They are easier to repair and widely available, but they usually do not last as long as metal or tile.


Tile roofing is the best fit for many hot-climate homes when the structure supports the weight and the installation uses the right fastening method. It offers excellent style and heat performance, but broken tiles and underlayment condition need attention.


A simple way to narrow the choice:


Priority

Best material to consider first

Highest wind resistance with low weight

Metal

Lowest upfront cost

Asphalt shingles

Long-term desert heat performance

Tile or reflective metal

Easy repairs

Asphalt shingles

Southwestern curb appeal

Tile

Best balance of wind resistance and energy efficiency

Metal or properly installed tile

Complex roof with many details

Asphalt shingles or a carefully planned metal system


The final decision should also reflect local code, roof structure, neighborhood standards, and contractor skill. In a high-wind area, a great installer using a good system usually beats a premium material installed poorly.


FAQ


Are metal roofs better than shingles in high winds?


Often, yes. A properly engineered metal roof can resist wind uplift very well and has fewer individual pieces that can lift like shingles. That said, high-wind-rated architectural shingles can perform well when installed correctly with proper fasteners, starter strips, and edge details.


Can tile roofs handle strong winds?


Yes, tile roofs can perform well in strong winds when the tiles are properly fastened and the underlayment is in good condition. Loose or poorly secured tiles can shift or become dangerous. Installation quality is critical.


What roof color is best for energy efficiency?


Lighter colors usually reflect more sunlight and absorb less heat than dark colors. Reflective metal, cool roof shingles, and lighter tile can all help reduce heat gain, especially in sunny regions.


Is a heavier roof better in windy weather?


Not always. Weight can help in some situations, but fastening and system design matter more. A heavy tile that is not properly secured can still fail. A lightweight metal roof that is correctly installed can perform extremely well.


How often should a roof be inspected in a windy area?


A roof should be checked at least once a year and after major wind events. Look for lifted shingles, loose metal panels, cracked tiles, damaged flashing, missing ridge pieces, and debris around vents or valleys.


Low-angle view of a secured roof edge with clean flashing on a sunny home
Strong edges and flashing help prevent wind from getting under the roof.

The right roof is the one built for your conditions


A high-wind roof should be chosen as a system, not just a surface material. Metal, asphalt shingles, and tile can all be good choices, but the best option depends on wind exposure, heat, roof shape, structure, budget, and the quality of installation.


For many homes, metal offers the strongest mix of wind resistance, low weight, and energy performance. Asphalt shingles make sense when cost and repair simplicity matter. Tile is a strong long-term choice for hot climates and homes built to support it.


Before choosing, compare real product ratings, ask about fastening and underlayment, and make sure the contractor understands local wind and heat conditions. For more help planning a roof that fits your home, climate, and budget, review this homeowner roofing guide.


bottom of page